Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Oizumi, Akito; Akie, Hiroshi
JAEA-Technology 2023-017, 93 Pages, 2023/12
JAEA-Technology-2023-017.pdf:8.45MB
After the decision of decommissioning JMTR (Japan Materials Testing Reactor), Japan Atomic Energy Agency investigated the possibility to construct a new irradiation test reactor to succeed JMTR (post-JMTR), and the final report of the investigated result was submitted to the Ministry of Education, Culture, Sports, Science and Technology on March 30th 2021. This investigation was carried out in 4 steps of (1) selection of reactor type, (2) reactor core plans studies, (3) neutronic studies, (4) thermal studies, and was finally (5) considered and evaluated. This JAEA-Technology report summarizes the process and the results of (3) neutronic studies. Neutron fluxes were calculated at irradiation sample positions in the investigated cores, the standard core and the compact core, and the calculated fluxes satisfied the required irradiation capability. It was also evaluated the two investigated cores' continuous reactor operation time in days in one refueling cycle, and the results guaranteed an operation days equality with that of existing JMTR. In addition, neutronic characteristics of the cores were estimated, such as power distribution in the core, control rod reactivity worth, reactivity coefficients, distribution of fuel burnup rate of each fuel element, and kinetics parameters. The evaluated neutronic characteristics were used in the post-JMTR final investigation report to confirm the neutronic feasibility by comparing with the neutronic limiting values of existing JMTR, and to estimate the cooling capability to make the core thermally feasible.
Li, C.-Y.; Wang, K.*; Uchibori, Akihiro; Okano, Yasushi; Pellegrini, M.*; Erkan, N.*; Takata, Takashi*; Okamoto, Koji*
Applied Sciences (Internet), 13(13), p.7705_1 - 7705_29, 2023/07
Times Cited Count：1 Percentile：0(Chemistry, Multidisciplinary)Takino, Kazuo; Oki, Shigeo
JAEA-Data/Code 2023-003, 26 Pages, 2023/05
JAEA-Data-Code-2023-003.pdf:1.66MB
Since next-generation fast reactors aim to achieve a higher core discharge burn-up than conventional reactors do, core neutronics design methods must be refined. Therefore, a suitable analysis condition is required for the analysis of burn-up nuclear characteristics to accomplish sufficient estimation accuracy while maintaining a low computational cost. We investigated the effect of the analysis conditions on the accuracy of estimation of the burn-up nuclear characteristics of next-generation fast reactors in terms of neutron energy groups, neutron transport theory, and spatial mesh. This study treated the following burn-up nuclear characteristics: criticality, burn-up reactivity, control rod worth, breeding ratio, assembly-wise power distribution, maximum linear heat rate, sodium void reactivity, and Doppler coefficient for the equilibrium operation cycle. As a result, it was found that the following conditions were the most suitable: 18-energy-group structure, 6 spatial meshes per assembly with diffusion approximation. Additionally, these conditions should apply to correction factors for energy group structure, spatial mesh and transport effects.
Ohgama, Kazuya; Takegoshi, Atsushi*; Katagiri, Hiroki; Hazama, Taira
Nuclear Technology, 208(10), p.1619 - 1633, 2022/10
Times Cited Count：3 Percentile：68.71(Nuclear Science & Technology)Ohgama, Kazuya; Katagiri, Hiroki; Takegoshi, Atsushi*; Hazama, Taira
Nuclear Technology, 207(12), p.1810 - 1820, 2021/12
Times Cited Count：3 Percentile：45.99(Nuclear Science & Technology)Sugawara, Takanori; Moriguchi, Daisuke*; Ban, Yasutoshi; Tsubata, Yasuhiro; Takano, Masahide; Nishihara, Kenji
JAEA-Research 2021-008, 63 Pages, 2021/10
JAEA-Research-2021-008.pdf:4.43MB
This study aims to perform the neutronics calculations for accelerator-driven system (ADS) with a new fuel composition based on the SELECT process developed by Japan Atomic Energy Agency because the previous studies had used the ideal MA (minor actinide) fuel composition without uranium and rare earth elements. Through the neutronics calculations, it is shown that two calculation cases, with/without neptunium, satisfy the design criteria. Although the new fuel composition includes uranium and rare earth elements, the ADS core with the new fuel composition is feasible and consistent with the partitioning and transmutation (P&T) cycle. Based on the new fuel composition, the heat removal during fuel powder storage and fuel assembly assembling is evaluated. For the fuel powder storage, it is found that a cylindrical tube container with a length of 500 [mm] and a diameter of 11 - 21 [mm] should be stored under water. For the fuel assembly assembling, CFD analysis indicates that the cladding tube temperature would satisfy the criterion if the inlet velocity of air is larger than 0.5 [m/s]. Through these studies, the new fuel composition which is consistent with the P&T cycle is obtained and the heat removal with the latest conditions is investigated. It is also shown that the new fuel composition can be practically handled with respect to heat generation, which is one of the most difficult points in handling MA fuel.
Pyeon, C. H.*; Talamo, A.*; Fukushima, Masahiro
Journal of Nuclear Science and Technology, 57(2), p.133 - 135, 2020/02
Times Cited Count：3 Percentile：96.32(Nuclear Science & Technology)Ohgama, Kazuya; Takegoshi, Atsushi; Katagiri, Hiroki*; Hazama, Taira
Proceedings of 2019 International Congress on Advances in Nuclear Power Plants (ICAPP 2019) (Internet), 8 Pages, 2019/05
Ohgama, Kazuya; Ota, Hirokazu*; Oki, Shigeo; Iizuka, Masatoshi*
Proceedings of 2019 International Congress on Advances in Nuclear Power Plants (ICAPP 2019) (Internet), 9 Pages, 2019/05
Sugawara, Takanori; Katano, Ryota; Tsujimoto, Kazufumi
Annals of Nuclear Energy, 111, p.449 - 459, 2018/01
Times Cited Count：13 Percentile：79.66(Nuclear Science & Technology)This study aims to review the ADS design based on the outcome for the last dozen years and to investigate the impact of impurities in the transmutation cycle on the ADS neutronics design. The impact of impurities in the transmutation cycle is investigated for the reviewed reference design. For the uranium from the partitioning, the accompaniment of 20 wt.% U against the Pu weight is acceptable although the MA transmutation amount will be decreased slightly. For the rare earth (RE) from the partitioning, the accompaniment of 5 wt.% RE against the MA weight is allowable. In the reprocessing, the decontamination factor, DF=10 for RE is enough from the viewpoint of the neutronics design. The impact of the fuel composition accuracy is also investigated. The uncertainty of the ZrN ratio against the MA fuel should be less than 0.2% to minimize a surplus proton beam current due to the uncertainty.
Ohgama, Kazuya; Ikeda, Kazumi*; Ishikawa, Makoto; Kan, Taro*; Maruyama, Shuhei; Yokoyama, Kenji; Sugino, Kazuteru; Nagaya, Yasunobu; Oki, Shigeo
Proceedings of 2017 International Congress on Advances in Nuclear Power Plants (ICAPP 2017) (CD-ROM), 10 Pages, 2017/04
Stauff, N. E.*; Ohgama, Kazuya; Aliberti, G.*; Oki, Shigeo; Kim, T. K.*
Proceedings of 2017 International Congress on Advances in Nuclear Power Plants (ICAPP 2017) (CD-ROM), 10 Pages, 2017/04
Ohgama, Kazuya; Ota, Hirokazu*; Ikusawa, Yoshihisa; Oki, Shigeo; Ogata, Takanari*
Proceedings of 2017 International Congress on Advances in Nuclear Power Plants (ICAPP 2017) (CD-ROM), 6 Pages, 2017/04
Yokoyama, Kenji; Jin, Tomoyuki; Hirai, Yasushi*; Hazama, Taira
JAEA-Data/Code 2015-009, 120 Pages, 2015/07
JAEA-Data-Code-2015-009.pdf:1.93MB
The second version of the versatile reactor analysis code system, MARBLE2, has been developed. A lot of new functions have been added inMARBLE2 by using the base technology developed in the first version (MARBLE1). Introducing the remaining functions of the conventional code system (JOINT-FR and SAGEP-FR), MARBLE2 enables one to execute almost all analysis functions of the conventional code system with the unified user interfaces of its subsystem, SCHEME. In particular, the sensitivity analysis functionality is available in MARBLE2. On the other hand, new built-in solvers have been developed, and existing ones have been upgraded. Furthermore, some other analysis codes and libraries developed in JAEA have been consolidated and prepared in SCHEME. In addition, several analysis codes developed in the other institutes have been additionally introduced as plug-in solvers. Consequently, 
-ray transport calculation and heating evaluation become available. As for another subsystem, ORPHEUS, various functionality updates and speed-up techniques have been applied based on user experience of MARBLE1 to enhance its usability.
Harada, Masahide; Watanabe, Noboru; Teshigawara, Makoto; Kai, Tetsuya; Maekawa, Fujio; Kato, Takashi; Ikeda, Yujiro
LA-UR-06-3904, Vol.2, p.700 - 709, 2006/06
Pulse characteristics data for every neutron beam line are indispensable in designing devices for neutron scattering experiments of JSNS. A detailed model was built and pulse characteristics of each beam line were estimated using the PHITS code and the MCNP-4C code. These results have been disclosed on the J-PARC homepage since September 2004. Due to changes of moderator shapes in a progress of manufacture design, we observed from the calculation that pulse structures of decoupled moderators were deteriorated, especially, those of pulse tail. We found that this deterioration was caused by leakage neutron from gaps between decouplers and absorbing liners of the reflector. For a final stage of the manufacture design, we carefully tried to find other factors which deteriorated the pulse characteristics. Furthermore, pulse structures of poisoned and unpoisoned decoupled moderators were evaluated with the consideration of heterogeneous burn-up and leakage neutron spectra including high-energy region up to GeV were estimated for each neutron beam hole.
Nishitani, Takeo; Yamauchi, Michinori*; Nishio, Satoshi; Wada, Masayuki*
Fusion Engineering and Design, 81(8-14), p.1245 - 1249, 2006/02
Times Cited Count：13 Percentile：65.83(Nuclear Science & Technology)no abstracts in English
Yamauchi, Michinori*; Hori, Junichi*; Ochiai, Kentaro; Sato, Satoshi; Nishitani, Takeo; Kawasaki, Hiromitsu*
Fusion Engineering and Design, 81(8-14), p.1577 - 1582, 2006/02
Times Cited Count：1 Percentile：9.98(Nuclear Science & Technology)no abstracts in English
Suzuki, Satoshi; Enoeda, Mikio; Hatano, Toshihisa; Hirose, Takanori; Hayashi, Kimio; Tanigawa, Hisashi; Ochiai, Kentaro; Nishitani, Takeo; Tobita, Kenji; Akiba, Masato
Nuclear Fusion, 46(2), p.285 - 290, 2006/02
Times Cited Count：2 Percentile：7.05(Physics, Fluids & Plasmas)This paper presents significant progress in R&D of key technologies on the water-cooled solid breeder blanket for the ITER-TBM in JAERI. By the improvement of heat treatment process for blanket module fabrication, a fine-grained microstructure of F82H, can be obtained by homogenizing it at 1150 
C followed by normalizing at 930 C after the HIP process. Moreover, a promising bonding process for a tungsten armor and an F82H structural material was developed by using a uniaxial hot compression without any artificial compliant layer. Also, it has been confirmed that a fatigue lifetime correlation, which was developed for ITER divertor, can be applicable for F82H first wall mock-up. As for R&D on a breeder material, Li
TiO
, the effect of compression loads on thermal conductivity of pebble beds has been clarified. JAERI have extensively developed key technologies for ITER-TBM, and now steps up into an engineering R&D stage, where integrated performance of TBM structures will be demonstrated by scalable mock-ups.
Maekawa, Fujio; Meigo, Shinichiro; Kasugai, Yoshimi; Takada, Hiroshi; Ino, Takashi*; Sato, Setsuo*; Jerde, E.*; Glasgow, D.*; Niita, Koji*; Nakashima, Hiroshi; et al.
Nuclear Science and Engineering, 150(1), p.99 - 108, 2005/05
Times Cited Count：6 Percentile：40.47(Nuclear Science & Technology)A neutronic benchmark experiment on a simulated spallation neutron target assembly with 1.94, 12 and 24 GeV proton beams conducted by using the AGS accelerator at BNL/US was analyzed to investigate validity of neutronics calculations on proton accelerator driven spallation neutron sources. Monte Carlo particle transport calculation codes NMTC/JAM, MCNPX and MCNP-4A with associated cross section data in JENDL and LA-150 were used for the analysis. As a result, although the overall energy range was encompassed from GeV to meV, i.e., more than 12 orders of magnitude, calculated fast and thermal neutron fluxes agreed approximately within 
40 % with the experiments. Accordingly, it was concluded that neutronics calculations with these codes and cross section data were adequate for estimating nuclear properties in spallation neutron sources.
Department of Fusion Engineering Research
JAERI-Review 2005-011, 139 Pages, 2005/03
JAERI-Review-2005-011.pdf:11.95MB
no abstracts in English
